 |
|
|
|
|
|
 |
 |
 |
|
 |
|
| |
Configuration B
Low Voltage Control
Inverted - Normal Position
  |
Standard Features:
• Specially equipped for inverted or normal positions
• Black load chain with chain bag for up to 100 feet of chain
• Non-reflecting matte black finish
• Swiveling hooks (except SM1, SM16, SM20 and SM25 body hook)
• Polyamide CHAINFLUX chain guide (SM5 and SM10)
• Over-travel and over-load protection via the torque limiting device (1)
• Steel electrical enclosure (except SM1, NORYL plastic; SM16-25 ABS plastic)
• Low voltage (115 VAC) control
• Ergonomic handles
• No pigtail or plug for power or control
• Two round cable glands for 5/16"-9/16" diameter cable
• Hoist motor thermal protection
• 230V-3PH-60Hz power supply
(1) Upper and lower limit (electrical) switches are not furnished on hoist in the inverted position.
 |
|
 |
|
| |
|
|
| |
|
| |
|
| |
|
 |
Stagemaker®
Technical Guide English |
|
|
|
Stagemaker®
Technical Guide Español |
|
|
 |
|
|
| |
|
 |
|
| |
|
|
Options:
• Self locking hook (top and bottom - SM5 and SM10)
• Fixed body hook
• Second Brake (SM5 and SM10)
• Steel control enclosure for SM1
• Slack fall stop
• Vinyl rain cover
• Drain hole in load sprocket compartment (SM5 and SM10 only)
• Geared limit switch
• 18" power pigtail - no plug
• 18" control pigtail - no plug
• 18" power and control pigtail - no plug
• 18" power pigtail with Twist-lock male plug* (L16-20P)
• 18" power and control pigtail with 7 pin male plug* (SX07LM)
• 18" control pigtail with Twist-lock female receptacle* (L14-20R)
• 18" power and control pigtail with 14 pin male plug (SCPB06SLX20-27PX)
• Micro-switch electrical limits** (SM1, SM5, and SM10)
• 208V-3Ph-60Hz power supply
• 460V-3Ph-60Hz power supply
* See technical guide for standard pin-out configuration.
** For hoist only mounted in the normal position.
Controllers:
• 4, 8, or 12 channel controller with remote configured for combined power / control or separate power and control
• Pistol-grip pushbutton controller or "Pickle" (SM1, SM5, SM10) with pigtail (standard pigtail length is 18", longer lengths available). Plug is optional
• Pushbutton controller with E-Stop button (SM16, SM20, SM25) |
|
| |
|
| |
|
Accessories:
• Power/Control cable with 7 pin connectors* (SX07)
• Power cable with Twist-lock connectors* (L16-20)
• Control cable with Twist-lock connectors* (l14-20)
• Pistol-grip pushbutton controller (Pickle) with no plug
• Pistol-grip pushbutton controller (Pickle) with Twist-lock plug*
• Twist-lock female receptacle (L14-20R)
• Twist-lock male plug (L14-20P)
• 7 pin male plug (SX07LM)
• 7 pin female receptacle (SX07LF)
• 14 pin male plug (SCPB06SLX20-27PX)
• 14 pin female receptacle (SCPB06SLX20-27SX)
• Mating connector for controller power input (CS83-64C)
• Twist-lock male plug (L16-20P)
• Twist-lock female receptacle (L16-20R)
• Single and twin flight cases (SM5, SM10, only)
• Motor cables
• Single flight case§
• Twin flight case§
 
*See technical guide for standard pin-out configuration.
§Manufacturer's warranty. For use with standard SM5 and SM10 hoist models only.
|
|
| |
|
|
Note:
• A mainline contactor is not furnished on SM1 hoists.
• Mainline contactor is specially wired so it is always energized when power to the hoist (SM5 and SM10 only) is applied.
• The mainline contactor in the hoist control panel for the SM16, SM20, and SM25 hoists is controlled by the E-Stop on the pushbutton controller.
|
|
| |
|
|
Hoist Dimension Drawing: |
|
| |
|
|
|
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
 |
NEW SM2 Configuration B
Capacity Tons |
Model |
Speed (fpm) |
Falls |
Chain type (mm) |
Power (HP) |
Nominal
Current
230 V |
Weight
of Unit (1)
(lbs) |
Chain
weight
(lb/ft) |
1/4 |
SM2 254 M1-B |
16 |
1 |
4 x 12 |
0.33 |
|
38 |
0.235 |
CONFIGURATION B TECHNICAL DATA: |
Capacity Tons |
Model |
Speed (fpm) |
Falls |
Chain type (mm) |
Power (HP) |
Nominal
Current
230 V |
Weight
of Unit (1)
(lbs) |
Chain
weight
(lb/ft) |
1/16 |
SM1 068 M2-B |
32 |
1 |
3.1 x 9.3 |
0.33 |
2 |
29 |
0.148 |
1/16 |
SM1 0616 M1-B |
64 |
1 |
3.1 x 9.3 |
0.33 |
2 |
29 |
0.148 |
1/8 |
SM1 128 M1-B |
32 |
1 |
3.1 x 9.3 |
0.33 |
2 |
29 |
0.148 |
1/4 |
SM5 254 M1-B |
16 |
1 |
4.8 x 12.5 |
0.65 |
2 |
58 |
0.363 |
1/4 |
SM5 258 M1-B |
32 |
1 |
4.8 x 12.5 |
1.3 |
4 |
58 |
0.363 |
1/4 |
SM5 2516 M1-B |
64 |
1 |
4.8 x 12.5 |
1.3 |
4 |
58 |
0.363 |
1/2 |
SM5 504 M1-B |
16 |
1 |
4.8 x 12.5 |
0.65 |
2 |
58 |
0.363 |
1/2 |
SM5 508 M1-B |
32 |
1 |
4.8 x 12.5 |
1.3 |
4 |
58 |
0.363 |
1/2 |
SM10 5016 M1-B |
64 |
1 |
6.8 x 17.8 |
2.8 |
7.2 |
113 |
0.726 |
1 |
SM10 1004 M1-B |
16 |
1 |
6.8 x 17.8 |
1.4 |
3.6 |
113 |
0.726 |
1 |
SM10 1008 M1-B |
32 |
1 |
6.8 x 17.8 |
2.8 |
7.2 |
113 |
0.726 |
1 1/2 |
SM16 1608 M1-B |
32 |
2 |
9.0 x 27.0 |
5.6 |
15.4 |
243 |
1.209 |
2 |
SM10 2002 M1-B |
8 |
2 |
6.8 x 17.8 |
1.4 |
3.6 |
118 |
0.726 |
2 |
SM10 2004 M1-B |
16 |
2 |
6.8 x 17.8 |
2.8 |
7.2 |
118 |
0.726 |
2 |
SM20 2008 M1-B |
32 |
1 |
9.0 x 27.0 |
5.6 |
15.4 |
243 |
1.209 |
2 1/2 |
SM25 2506 M1-B |
25 |
1 |
9.0 x 27.0 |
5.6 |
15.4 |
243 |
1.209 |
5 |
SM25 5003 M1-B |
12.5 |
2 |
9.0 x 27.0 |
5.6 |
15.4 |
243 |
1.209 |
(1) approximate weight without chain
|
|
|
 |
|
|
|
