Stagemaker Concert Hoists: Controllers, Configuration C D V S


C Example of Use	Configuration C Third Party controllers and software, such as Niscon, Inc's. Raynok Motion Control System maximizes the capabilities of Stagemaker® Configuration C hoists. The system can be expanded to accommodate 12 controllers and 96 hoists.
D Example of Use	Configuration D Used where a higher degree of safety is needed. The hoist complies with enhanced safety regulations in accordance to DIN 56925. The enhanced features and low voltage control are operated from a standard or programmable controller.
E Example of Use	Configuration E Hoists are set up to utilize external controls (typically VFD), which are not included. The hoist is mounted in the normal position, but when specially equipped, the hoist can also be mounted in the inverted position.
	Configuration V Utilizes three-phase power and low voltage control. The hoist (SM10) is equipped to be mounted in the normal position. Please refer to the Stagemaker® technical guide for more information. Available only in 460V-3Ph-60Hz.