R&M Materials Handling equipment:overhead cranes:electric wire rope, chain hoists & manual products

EZ LIFT^TM MANUAL PRODUCTS:
MANUAL CHAIN HOISTS	LEVER HOISTS	TROLLEYS	BEAM CLAMPS

RM Series II Manual Chain Hoist

10 ft (3 m) standard lift. Hand chain is 2 ft (0.5 m) less than lift. Additional lifts available.
Overload limiting device to prevent lifting loads beyond rated capacity. (Except 1/4 ton [250 kg] unit).
High strength, grade 80 alloy steel load chain with galvanized finish for corrosion resistance.
Hooks are alloy steel, heat treated and equipped with hook latches and inspection points.
Dual pawl Weston-style brake with two brake friction discs provides four braking surfaces.
Meets or exceeds international standards, including ASME B30.16.

Model	Capacity Ton [kg]	Falls	Chain Pull ² Lbs. [N]	Overhaul Ratio ³	Headroom Inch [mm]	Weight** Lbs. [kg]
RMII-250	1/4 [250]	1	53 [235]	17	11 [280]	14 [6.4]
RMII-500	1/2 [500]	1	54 [240]	33	13.6 [345]	25 [11.3]
RMII-1000	1 [1000]	1	57 [250]	53	14.8 [376]	29 [13]
RMII-1500	1.5 [1500]	1	60 [265]	78	17.4 [442]	40 [17.8]
RMII-2000	2 [2000]	1	76 [335]	90	18.5 [470]	45 [20.2]
RMII-3000	3 [3000]	1	84 [372]	106	21.6 [548]	78 [35]
RMII-5000	5 [5000]	2	81 [360]	197	27.1 [688]	91 [41.3]
RMII-7500	7.5 [7500]	3	84 [372]	296	27.1 [688]	137 [62]
RMII-10000	10 [10000]	4	84 [372]	394	30.1 [765]	173 [78.5]
Note: Reference Technical Guide for additional dimensional data ² Effort required to lift rated load. ³ Ft [m] of hand chain movement required for 1ft [m] of lift. ** Note: Weights shown are for models with 10 ft. (3m) of lift