RM Series II Manual Chain Hoist

• Standard lift is 10 ft (3 m). Hand chain drop is 2 ft (0.5 m) less than lift. Additional lifts available.
• Overload limiting device to prevent lifting loads beyond rated capacity. (Except 1/4 ton [250 kg] unit).
• High strength, grade 80 alloy steel load chain with galvanized finish for corrosion resistance.
• Hooks are alloy steel, heat treated and equipped with hook latches and inspection points.
• Dual pawl Weston-style brake with two brake friction discs provides four braking surfaces.
• Meets or exceeds international standards, including ASME B30.16.

Note: Reference Technical Guide for additional dimensional data
² Effort required to lift rated load.
³ Ft [m] of hand chain movement required for 1ft [m] of lift.
** Note: Weights shown are for models with 10 ft. (3m) of lift